• Автор темы Sergej
  • Дата начала
  • " /> Avid Tips - Avid Media Composer Console Commands | SoftoolStore.de - Софт, Avid Media Composer, Книги. | бесплатные прокси (HTTP, Socks 4, Socks 5)

    Avid Tips Avid Media Composer Console Commands

    Sergej

    Administrator
    Сообщения
    631
    Баллы
    850
    VK
    Skype
    Offline
    #1
    Avid Media Composer Console Commands

    Код:
    CheckSequences - Checks all sequences for internal inconsistencies
    
    RepairSequences - Attempts to repair sequences with internal inconsistencies
    
    
    aafexport      -- export selected items from named bin as aaf files.
      aafklv         -- Enable KLV AAF export format.
      aaflog         -- Sets AAF Import logging.
        state may be "console", or "file", or "both"
    
      add            -- Add an expression to a variable.
      AddDigIntCols  -- <no description>
      AddPE          -- <no description>
      admpassthru    -- Enable/Disable OSX software audio passthru.
      admpreload     -- Set the ADM preload amount
      admvsync       -- Toggle ADM vsync synchronization
      afeklv         -- Enable KLV AFE export format.
      AllDrives      -- Allows all drives to act as media drives. (Type 'AllDrives -1' for help)
      AllocateMem    -- <no description>
      AllocChecker   -- Toggles the memory allocation tracking gear on/off
      AllowCrossRateTranscode -- <no description>
      AllowMemoryDomainDoubling -- Tells the editor to use less memory at the cost of performance when doubling is disabled.  It is always disabled in 32-bit operating systems.
      AllowUNCWrite  -- Allow writing to UNC paths.  Persistent.
    
      AMA            -- Display a list of the AMA console commands.
      AMA_EnableAAFdump -- Set the boolean to enable AAF dumping to the temp folder.
      AMA_FileToBin  -- Finds the appropriate MSP for the specified file and imports the clip to the named bin
      AMA_GetLoggingLevel -- Get the AMA logging level: Errors=0x0, warnings=0x01, verbose=0x02, trace=0x04, info=0x08, all=>0xff
      AMA_GetUseThreads -- Displays if AMA threading is enabled
      AMA_ListComponents -- List AMA Plugin Components
      AMA_ListPlugins -- List AMA Plugins
      AMA_ManagerDump -- Dump the AMA_Manager
      AMA_MSPBlowover -- Set the AMA MSP Blowover check bits to automatically refresh clips based on media file replacement:
        ShowCurrent<0, None=0x0, AppResume=0x1, BinOpen=0x2, ProjectIdle=0x4, ProjectResume=0x8, All=0xf
      AMA_MSPLink    -- Finds the appropriate MSP for the chosen file and imports the clip to the named bin. No MVP is involved.
      AMA_MSPLinkDir -- Mimics 'Link To File functionality' for all files in the specified directory. No MVP is involved.
    
      AMA_MVPLink    -- Finds the appropriate MVP for the chosen file and imports the clip to the named bin. No MSP is involved.
      AMA_SetCachedBitRateLimit -- Sets maximum bit rate for cached AMA video material (set to 0 to disable)
      AMA_SetLoggingLevel -- Set the AMA logging level: Errors=0x0, warnings=0x01, verbose=0x02, trace=0x04, info=0x08, all=>0xff
      AMA_SetUseThreads -- Set the boolean to use AMA threads. This defaults to being enabled.
      AMA_ShowDebug  -- Enable the debug OsPrintfs to give more information to the status of the threads
      AncData        -- Toggle Ancillary Data Support
      answer         -- Present a popup with 1-3 choices, and return the response
      AROaddClient   -- adds a machine name or IP address to the list of authorized clients for the Avid Remote Objects server
      AROdebug       -- enable or disable debugging statements in the Avid Remote Objects server
      AROlog         -- enable or disable logging traffic for the Avid Remote Objects server
      AROremoveClient -- removes a machine name or IP address from the list of authorized clients for the Avid Remote Objects server
      AROstart       -- starts the Avid Remote Objects server
      AROstatus      -- display status for the Avid Remote Objects server
      AROstop        -- shuts down and unloads the Avid Remote Objects server
      asserT         -- Assert that a given condition is true or generate an exception.
      AsyncResColumnDrawing -- <no description>
      AtticInfo      -- Toggles displaying attic related information to user
      audiobuffertime -- Set Nitris audio playback buffer size in microseconds
      audioextras    -- Enable or disable extra audio features
      AudioHWCalibration -- Displays and allows for setting the software side of Audio Hardware Calibration
      audiopreread   -- Set the audio preread amount in seconds
      AudioRateMonVerbose -- Set AudioRateMonitor console logging
      AvHLockDebugTogglE -- <no description>
      aviddevicehwunderrun -- Enable/Disable HW Underrun detection.
      aviddeviceinfo -- Get FireBOB Information from the hardware
      avslog         -- Routing of Video Slave logs to console or output
      avstrc         -- Delay Tracing and Override. Traces coincidence point and StartIO timings. Allows to override.
      AVXRedrawRate  -- Change the millisecond rate that background windows are refreshed
      AVXSetupCleanup -- AVXSetupCleanup on/off
      AVXToggleAltFrameOpt -- Toggles GetAlternateFrame UI Optimization
      BinRescan      -- Enable/Disable MSMRescan when opening shared bins.
      BuildTrace     -- <no description>
      CacheBadLocators -- Enables/disables caching of bad network paths for batch import
      CaptureMPEG    -- Enables MPEG Baseband Capture
      ChangeProjType -- Change the project type
      ChangeXDCAMReadFlags -- Changes the XDCAM read flags. Boolean UseDirectIO param specifies using DirectIO/BufferedIO. Integer PageSizeKb param specifies read sizes (only 64, 128, 256 are supported)
      CheckCommands  -- <no description>
      CheckDecks     -- Re-initializes serial communications with decks
      checkmem       -- <no description>
      CheckMob       -- Attempts to diagnose a broken mob.
      CheckSequences -- Check sequences for errors
      ChromaFilt411  -- Apply chroma filtering during DV25 title renders
      ChromaHueReverse -- Reverses the Software Color Effect Chroma Hue rotation
      CkPE           -- <no description>
      cleanupdatabases -- <no description>
      ClearCachedLocators -- Clears cached locators found during batch import
      ClearPE        -- <no description>
      ClearProtocolErrors -- Resets protocol error logs
      CloseAllAVXPlugins -- Close down all AVX plug-ins
      cmd_setImportSlideLength -- Sets the number of frames for subsequent imports of single frame graphics.
      cmdDumpPrecomputes -- Display a list of precomputes for the current project
      CoalesceMem    -- <no description>
      CodecInfo      -- Extract codecs info from Compression Manager and save in a header file
      CodecLog       -- Show codec error log.
        dump - dump tail (most recent) portion of logs to the console (use Redir first to dump to file)
        dumpall - dump all logs to the console (use Redir first to dump to file)
        on - show the logs in the console as they come in
        off - do not show the logs in the console as they come in
        level - set the log level, higher level for more logs, must also specify level parameter
    
      CompactMeM     -- <no description>
      ConcurrentLocators -- enables concurrent locators
      Console        -- Type 'Console help' for complete help.
      consoleloG     -- Turns Console logging on and off.
      consolelogofF  -- Turns Console logging off.
      consoleWindow  -- Get or set the size and position of the console window.
      ConsolidateGroupsOnExport -- Toggles whether or not group clips are consolidated on export.
      ConvertAVSMT   -- <no description>
      ConvertColorSpace -- When on, converts 709 HD to 601
      CoreEvent      -- Type 'CoreEvent help' for complete help.
      CoreEventLogger -- Type 'CoreEventLogger help' for complete help.
      CountThings    -- Display count and list of all consumers/converters/producers in current pipes
      DebugACFMemAllocation -- Toggle debugging info for the ACFMemAllocation interface
      debugadm       -- Debug audio device manager
      DebugMenu      -- <no description>
      DebugWin       -- <no description>
      DefaultImageStartAlignment -- Sets the default value of image start alignment
      DesktopSampleOffset -- Set the sample offset to sync desktop audio and video
      DeveloperDongleMode -- Enables or disables DeveloperDongle privileges
      DigitalCutFrames -- <no description>
      digitalCutPlayDelay -- Set the timeout value to wait before starting player when doing Digital Cut
      DigitalCutPlayerCycles -- Set minimum player cycles for UI update.
      Disable3D      -- Disables 3DFX on subsequent launches
      DisableSWDecode -- Disables SW Decode of specified resolutions...
      DisableSWEncode -- Disables SW Decode of specified resolutions...
      disco          -- <no description>
      DisplayControllerTraffic -- Display controller messages to Composer
      dms            -- DMS Test
      dmslog         -- Toggles DMS logging on and off
      dmsmonikers    -- Toggles DMS moniker source from node to checkin
      DoFtlAssert    -- DoFtlAssert behavior.
      DontWrite      -- Enable/Disable DIDWriter
      DPE            -- <no description>
      DPEX           -- <no description>
      DPEXM          -- <no description>
      dump           -- Dump system state to console
      dumpampimixer  -- Prints out the AMPI mixer signal net
      DumpCacheDetails -- Dumps a SingleLevelWaveformCache's cache map details to a text file in the app startup folder
      DumpClipSummary -- Dump a summary of clips found in the currently loaded sequence.
                        By default, all tracks in the sequence are checked, ignoring any In-Out marks.
      DumpComponent  -- Dumps a Component to the console.
      DumpDrives     -- Dumps internal drive list.
      DumpEffectDepth -- DumpEffectDepth on/off
      DumpFXLocation -- Dump a list of effects found in the currently loaded sequence with track and timecode location information.
                        By default, all tracks in the sequence are checked, ignoring any In-Out marks.
      DumpFXSummary  -- Dump a summary of effects found in the currently loaded sequence.
                        By default, all tracks in the sequence are checked, ignoring any In-Out marks.
      dumpinputmixer -- Dump state of input mixer
      DumpLocalVolumes -- Dumps LocalVolume list.
      DumpMachineAttributes -- Displays template attributes for each machine
      DumpMachineTemplates -- Displays deck templates read into system
      DumpMaxPeaks   -- Display Audio Meter Max Peaks
      DumpMediaFilePaths -- Enables print of media file paths during creation of media files.
      DumpMemInfo    -- Write a dump file containing memory usage and heap information
      dumpmetertimestats -- Dump stats on the meters
      DumpMob        -- Dumps a Mob to the console.
      DumpOverrunInfo -- Dump error logs after overruns.
      DumpPlayHistory -- <no description>
      dumppmr        -- dumppmr drive
        drive is the refnum of the drive to be dumped
        No drive means all mobs on all drives including well known mobs are to be dumped.
        If drive is wkm, only the well known mobs are to be dumped.
        If drive is mdirs, only media directories with their drives refnums are to be dumped
    
      DumpProfileByTotal -- <no description>
      DumpProtocolErrors -- Displays serial communications errors
      DumpRecordMon  -- Dumps to the console the composition in the Record Monitor.
      DumpRenderGraph -- Enable the Player to dump Render Graph
      DumpSlots      -- Dumps to the console the pending memory alloc/lock (slots) list
      DumpSourceMon  -- Dumps to the console the composition in the Source Monitor.
      DumpSourceSummary -- Dump a summary of sources found in the currently loaded sequence.
                        By default, all tracks in the sequence are checked, ignoring any In-Out marks.
      DumpStartupTimeLog -- Dumps startup time log info - does not reset data
      DumpVolumeGroups -- Dumps list of VolumeGroups.
      DumpVolumes    -- Dumps internal volume list.
      DumpWaveformEngine -- Dump the WaveformCache state to a text file in the app startup folder
      DynDialog      -- Use "DynDialog help" for a list of possible dialogs
      DynPane        -- Use "DynPane help" for a list of possible views.
      DynView        -- Use "DynView help" for a list of possible views.
      ebi            -- <no description>
      echo           -- Enables or disables echoing script commands to the console.
      EmbedDNXCC     -- Toggles whether to embed closed captioning in DNX media.
      EmbedDNXCCdefault -- Sets ancillary data slot defaults.
      EmbedDNXCCOptions -- Sets the options for ancillary data in DNX media. (slot DID SDID on)
      Enable3D       -- Enables 3DFX on subsequent launches
      EnableBinDialogue -- Toggles displaying Bin dialogue to user during Bin operations
      enableHD       -- Reset the firehose board and get out of the decoder hung state.
      EnablePCEdit   -- <no description>
      EnableSWCC     -- Enables software color correction
      EnableSWDecode -- Enables SW Decode of specified resolutions...
      EnableSWEncode -- Enables SW Decode of specified resolutions...
      EncodeAVCHD    -- Enables AVC HD Encode
      EncodeMPEG2IFrame -- Enables MPEG2 I Frame Encode
      EncodeMPEG4    -- Enables MPEG4 Encode
      eqt            -- <no description>
      exiT           -- Exit a script.
      Expect         -- Assert that every line in a block will generate a given exception.
      exportOMFI     -- Export an OMFI composition.
      FakeDeck       -- Uses a 'virtual' deck for deck control
      fatal          -- Abort a script with an assertion 'fatal' error message.
      fillmem        -- <no description>
      FixOMFIMobInSrcMon -- <no description>
      FlushAllWaveformData -- Flushes all the waveform cache data
      ForceCheckin   -- Toggles forced full checkin on and off.
      ForceHDTranscode -- Force Transcode of HD to SD when Digital Cutting HD material in a SD Project.
      ForceImportResolve -- Forces all imported mobs to wn the mob resolution.  Non-persistent.
    
      ForceVideoUnderrun -- Forces video underruns. (Type: 'ForceVideoUnderrun -1' for full help.)
      foreach        -- Foreach statement using a comma separated list.
      forEachBinMob  -- Executes a command for each Mob.
      forEachMob     -- Executes a command for each Mob.
      FrameRateMixMatch -- Enable/Disable support for frame rate mix & match.
      FSP            -- Full Screen Playback: 'FSP Help' for more info
      FTCA           -- FTCA [1 = Enable AlphaMono handling, 2 = Disable AlphaMono handling]
      FTCQ           -- FTCQ [1 = Speed over quality, 2 = Quality over speed]
      FtlAssert      -- FtlAssert behavior.
      FulfillAll     -- Fulfill all pending requests at once to make sure cache is full
      FullQualFX     -- Allows Full Quality Play with SWRTFX
      GammaConform   -- GammaConform toggle 8 bit color correction gamma control range between 16-235/0-255
      GetClips       -- Populate the specified bin with the clips from the specified path using AMA.
    
      GetP2Clips     -- Places all the master mobs located in rootPath if it's a media directory into targetBin.
    If rootPath is "dlg", a directory selection dialog is presented.
      Global         -- Create a global variable.
      GPP            -- Display a graph of the player pipes (and, optionally, vdm devices) from the current player
      GPPOptions     -- Sets options for the GraphPlayerPipes/GPP commands.  Type GPPOptions help for more information.
      GraphPlayerPipes -- Display a graph of the player pipes from the current SF & RT players
      GraphPlayerPipesRemote -- Dumps dotty description of player pipes (and, optionally, vdm devices) from the current player to remote console
      HDTitleFilter  -- Enable/Disable filtering of HD titles and mattes for downconvert to SD.
      help           -- Help the user.
      hwtrc          -- Hardware Tracing tools
      hwtrctest      -- Hardware Tracing tools test
      iF             -- iF statement (scripts only).
    Single-statement if structure:
    iF cond THEN stmt [ELSE stmt]
    iF condition THEN statement
    [ELSE statement]
    iF condition
      THEN statement
      [ELSE statement]
    Multiple-statement if structure:
    iF condition
      THEN Statement-List
      END iF
    iF condition THEN
      Statement-List
      ELSE statement
    iF condition
      THEN Statement-List
      ELSE Statement-List
      END iF
    If statements are valid in scripts only.
      IgnoreQTRate   -- This will ignore the edit rate in a Quicktime file and import the file as if it is sampled at the current project rate
      ImportEvents   -- See more detailed import events.
      iNewsDebug     -- Temporary debugging for iNews Capture Mgr Control
      LastDownsampleFactor -- Reports the last downsample factor requested in GetWaveform()
      LBDebug        -- Sets debugging flags in the buildpipes load balancing code
      leakmem        -- Leak memory (in MB)
      LegacyOverlay  -- Force legacy overlay for desktop video: 'LegacyOvelay Help' for more info
      LockMixdownMem -- Toggle locking down of memory for mixdowns
      Log            -- Open a log file or close the current log file.
      LogCalls       -- Direct all calls to Avidtalk commands into the logfile.
      LogClaims      -- <no description>
      LogCompMgrCalls -- Enables logging of Compression Manager
      LogLocateBuffers -- Enables/disables locate buffer log
      LogLoopPlay    -- Toggle the logging of Loop Play
      LogOnException -- When enabled, generates coreevent log on first player exception.
      LogTest        -- Test the log file triggers
      ltcphase       -- Set LTC phase offset in frames (+1, -1, or 0)
      MarkToLoopDelay -- <no description>
      MarqueeDebug   -- Enable/Disable Marquee debug messages
      MaxBrushStroke -- <no description>
      mcsessionlog   -- Toggles MCSession logging on and off
      mdo            -- Sets display options for dumping Mobs to the Console.  (shortcut for MobDumpOptions)
      mem_more_masters -- <no description>
      MemClearTotals -- <no description>
      MemPrintStats  -- <no description>
      MeridienColorFX -- Rotates hue on all color effects in sequence
      MeridienDSK    -- <no description>
      midi002        -- Enable or disable Digi 002 as MIDI control surface on Mac
      MixdownDebug   -- displays debug info during Mixdown in app console
      MixMatchRefreshPrompt -- Enable/Disable prompt for automatic refresh of Motion Adapters in sequences loaded into monitors.
      mixtool        -- Open deprocated mix tool
      MobDumpOptions -- Sets display options for dumping Mobs to the Console.
      MobSummary     -- Displays a one-line summary of a Mob.
      MonitorProtocol -- Select protocol to monitor
      MotionFXSize   -- MotionFXSize on/off
      MpegExportOptions -- Flip MPEG Export Option.
        verbose - turn on/off debug messages.
        elementary - turn on/off elementary stream keeping.
        splicing - turn on/off splicing.
        VBV - observe/ignore VBV constraint.
    
      msm            -- Type 'msm help' for complete help.
      MSMContinuousBG -- Run AsyncMSMRescan continuously for debugging
      MsmIsOnlineFileCheck -- true means IsOnline uses filesystem (slower, accurate) vs cache (faster, less accurate).
      MulticamPreload -- Allows the user to override the default number of frames to pre-load when beginning multicam playback.  This can help reduce dropped frames.
      MultiChannel   -- Enables/Disables the availability of multichannel audio support in the application.
      multichannelpipes -- Toggles building multichannel pipes for interleaved media
      MultithreadFX  -- Toggles multithreaded rendering of FX
      NextProgressWindowStyle -- NextProgressWindowStyle
      nolocks        -- toggles filesystem locks off and on
      OMMCheckAllMasterMobs -- Ask asset mgr about all master mobs in a bin, not just mobs on shared storage(toggle)
      on             -- Define an event handler.
      openBin        -- Open a Bin.
      OpenProject    -- <no description>
      OsPrintf       -- Enables/Disables OsPrintf. Type 'OsPrintf help' for complete help.
      PaintFX        -- Toggles paint effects implementation to select new or legacy implementation
      PaneIDkey      -- sets up F12 to be the Pane Dump key
      PaneIDToolTips -- Toggle paneID tooltip
      PauseToStopDelay -- <no description>
      PerfTest       -- Peformance Tests
      PinnacleOptions -- Change MPEG Export Pinnacle Encoder Options.
      PlayEvent      -- Type 'PlayEvent help' for complete help.
      PlayLength     -- <no description>
      playStats      -- play stats command
      Plog           -- Play event logging: Plog <numEvents> <highmask> <lowmask> <zoneLogging=false>
      powerman       -- Enable/Disable handling Power Management broadcast messages from OS
      PreventCachingWaveforms -- forces the WaveformCache into the prevent caching state
      PrintACFDefinition -- List the registered ACF Component definitions.
      PrintBBPAllocs -- Print the current allocations in the Big Buffer Pool to the debugger console
      PrintCacheStats -- Prints various collected cache statistics.
      PrintPlayerParams -- Prints out PlayerParam info from settings
      PrintPlayerPipes -- Display the player pipes from the current player
      PrintPlayHist  -- <no description>
      PrintProcessorInfo -- Display information about the installed processors.
      ProfileFix     -- Change the way we create the clip on the Profile using the extended BVW commands.
      PurgeAllUnreferenced -- <no description>
      put            -- Store expression into a variable.
      QuitMC         -- Exits from the MediaComposer application
      RecreateTitleMedia -- <no description>
      Redir          -- <no description>
      RefNullComp    -- References a null AComposition pointer, causing an error.
      RenameMediaFiles -- <no description>
      reneW          -- Resets the problem and error counters.
      RepairKNMasks  -- <no description>
      RepairKNStart  -- <no description>
      RepairMob      -- Attempts to repair a broken mob.
      RepairSequences -- Check sequences for errors and attempt to repair errors
      RepairSoundTC  -- <no description>
      repeat         -- General looping keyword.
      ResampleCapturedAudio -- Turn on/off DV audio resampling during capture
      ResetCacheStats -- Resets collected cache statistics.
      ResetDiskBlockSize -- Toggle between block size and chunk size for reported disk block size (requires the pipes to be rebuilt)
      RestoreMaxALBMSize -- Restores the maximum size of the Locate Buffer Manager to its default - Requires relaunch
      RestoreMaxStreams -- <no description>
      ReverseEmailSSLSettings -- Sets port 465 to use explicit SSL and all other ports to use implicit.
      rgbout         -- Toggle mode for enabling output of RGB.
      Run            -- Load a script file & execute any non-definition commands.
    The script file name is taken literally and must not be enclosed in quotes.
      Run            -- Load a script file & execute any non-definition commands.
    The script file name is taken literally and must not be enclosed in quotes.
      RunScript      -- Load a script file & execute any non-definition commands.
    The script file name may be any string expression.
      RunScript      -- Load a script file & execute any non-definition commands.
    The script file name may be any string expression.
      ScratchMode    -- ScratchMode [0 = dup, 1 = both]
      ScrubLen       -- Sets the range of frames to use when building the single frame player
      SetAMAQTForcedFrameRate -- Forces the plug-in to use the specified rate. Usage: SetAMAQTForcedFrameRate <Boolean enabled> <float forcedFrameRate>
      SetAMAQTSettingFloat -- Sets settings editor settings to be used by AMA plug-ins. Usage: SetAMAEditorSettingFloat <int settingID> <float param2>
      SetAMAQTSettingInt -- Sets settings editor settings to be used by AMA plug-ins. Usage: SetAMAEditorSettingInt <int settingID> <int param1> <int param2>
      SetAMAQTSingleFrameDuration -- Sets duration of a single frame. Usage: SetAMAQTSingleFrameDuration <int seconds>
      setamimode     -- Sets the AMI mode.
      SetAudioLoopPlayPerformance -- <no description>
      SetAudioTestingState -- <no description>
      SetAVX2DebugLevel -- Set the verbosity of console reporting.
      SetBorrowCarry -- Allow user to adjust borrow carry operations in build-pipes
      SetCacheReq    -- Set number of waveform cache requests to fulfill each Idle cycle
      SetConstantBinTitles -- Toggles modification to the bin name in the window title
      SetDoNotRetFromPlay -- If (1) then play will NEVER allow the UI to update.
      setdsmserverlog -- Set DSM Server log level (0-5)
      SetDueTimeBias -- sets bias in seconds to decrease PreRead Due times
      SetEcho        -- Flag to echo all executed commands to the console.
      SetEmailInfoUI -- Brings up Email Info UI
      SetMAIOLimit   -- Sets num of Multi Async per Stream
      SetMaxALBMSize -- Sets the maximum size of the Locate Buffer Manager - Requires relaunch
      SetMaxStreams  -- <no description>
      SetMixdownConserve -- Set mixdown memory conserve factor
      SetMonitorExceptionVerbosity -- Sets the user feedback level used by the AMonitorPane when it encounters player exceptions
      SetMouse       -- Set mouse play parameters
      setnamefile    -- sets preempting input for AFileDialog::NameFile.
        path - path to be used during preemption
        null args echos the current values
    
      SetPE          -- <no description>
      SetPEmask      -- <no description>
      SetPEsize      -- <no description>
      SetPlayerUIbalance -- This command alters the delicate balance that adjusts the UI update frequency vs Player underruns/dmfas
      SetPlayStats   -- Set the showing of play stats
      SetPrecompAutoDelete -- Enable/Disable automatic deletion of unsaved precomputes
      SetRenderThreadWait -- Change the amount of time the scheduler waits to let the render thread run
      SetRescanWarnings -- <no description>
      setrunoncebuffer -- Enable/Disable direct sound run once capture buffer.
      SetSBReqListSize -- Sets num of ms in SpringBuffer Streaming request list
      SetSFStats     -- Set the showing of play stats
      SetShowBuildPipes -- Display the player pipes whenever the pipes are rebuilt: (graph = use dotty graph)
      SetSleepTime   -- Set time to sleep between null events
      SetSWFXSubPipes -- Force upstream effects of a SW effect to also be in SW (default = play). (Type: 'SetSWFXSubPipes help' for help using this command.
      SetUndoMan     -- <no description>
      SetUpdateWhilePlayingOn -- Set whether globalState should be updated during play.
      SetVideoVitalsFromTrackGroup -- Enable/Disable SetVideoVitalsFromTrackGroup
      SetVolumeLatency -- Slows down the volume's I/O to simulate the slow volumes. Latency is in msec
      sf             -- Toggle to display the count of late and skipped frames in the console at the end of streaming play.
      ShowAdvancedMem -- Enable/Disable advanced memory stats on project window
      showbptime     -- Toggles display of build pipes times in the console
      ShowCmd        -- Hidden command to enable using hidden commands.
      ShowHeapErrors -- <no description>
      ShowMixdownMemStats -- Toggle showing mixdown memory statistics
      ShowPending    -- Shows Current State of Waveform Cache Pending Mechanism, ON/OFF
      ShowPlayStats  -- Toggle the showing of play stats
      ShowPlayStats  -- Toggle the showing of play stats
      ShowSFStats    -- Toggle the showing of single frame play stats
      ShowVolumeInfo -- Shows the information about all volumes
      SkippedFrames  -- Toggle to display the count of late and skipped frames in the console at the end of streaming play.
      SlowAsyncReads -- Slows down only new async execution model reads.
      sod            -- Toggle mode for stopping playback on dropped frames.
      ssw            -- Stereo support
      StatTest       -- <no description>
      StatTest       -- <no description>
      StepToTrim     -- <no description>
      stopondrop     -- Toggle mode for stopping playback on dropped frames.
      Subsys         -- Control the debug parameters
      SuppressUnderruns -- Turn suppression of underruns on/off. (Type: 'SuppressUnderruns help' for help using this command.
      TCBreakTolerance -- Continuous Timeode Checking: If the difference between 2 consecutive timecodes is more than 6 frames,
    Avid considers this a break in timecode on the tape. You can override the 6 frame tolerance by setting this value.
      TCChecking     -- <no description>
      tearingfix     -- Toggle tearing fix for Source/Record monitor windows
      TestColorConversion -- <no description>
      testerr        -- <no description>
      testNew        -- <no description>
      tmDump         -- <no description>
      tmDumpAllMethodLists -- <no description>
      tmDumpAllTools -- <no description>
      ToggleACFClientMonitorForAVX -- Toggles use of ACF Client Monitor for avxInstance_v1::DrawToVideoBuffer.
      ToggleAsyncAMASPM -- Toggles the default use of asynchronous behavior when reading data through AMA Sample Provider Mode
      ToggleAVXRedraw -- Toggle background redrawing when plug-in UI is up
      ToggleAVXResizing -- Enable/Disable AVX effect resizing
      ToggleCacheStats -- Toggles the collection of cache statistics.
      ToggleCheckDSCalc -- Toggles checking of downsample calculations
      ToggleCnvtrs   -- Toggles use of new asynch converters
      ToggleDebugTools -- Toggle the enabling/disabling of the debug tools - requires restart.
      ToggleDefEC    -- Toggles enabling of deferred tasks for effects
      toggledhdump   --
      ToggleDXMouseSupport -- Enables/Disables Experimental Mouse Jog & Shuttle support with Nitris/Mojo DX
      ToggleFileCachePreReads -- Toggles the use of pre-reads when reading through cache.
      ToggleFileCaching -- Toggles the use of caching when reading media files.
      ToggleHWDecode -- Toggles use of Hardware Decode converters
      ToggleMAIO     -- Toggles Multiple Asyncio per Stream
      ToggleMonPaneBlip -- Toggle single frame display in the monitors.
      ToggleMP2Mixdown -- <no description>
      ToggleMPEGCache -- Enable/Disable Long GOP media parameters cache.
    
      ToggleNewProgressWindow -- ToggleNewProgressWindow
      TogglePending  -- Toggles whether or not we're using new Pending Cache Mechanism
      TogglePreRead  -- Toggles whether PreReads are issued to ISIS volumes
      TogglePrintNegotiatedAMASPM -- Toggles the default use of printing negotiated attrs through AMA Sample Provider Mode
      ToggleReadRate -- Toggles whether ReadRates are osprintf'd
      togglerunmetersinplaycmd -- Toggle doing the meters directly in PlayCmd
      toggleStatSpace -- Toggle statistics space calculation
      ToggleThreadedScheduler -- Toggles the default use of the threaded scheduler on real-time pipes
      ToggleThreadedSFMode -- Enables/Disables Threaded Single Frame Mode
      ToggleTrackRenderingOrder -- Toggle the track rendering order (persisted): Bottom->Top / Top->Bottom
      ToggleWFfailLoudly -- Toggle advanced waveforme engine propagating exceptions
      ToggleYUV      -- Toggles use of board for 1:1 <-> YUV
      tracefd        -- Enables and disables file dialog tracing.
      tracesuspendresume -- <no description>
      TrimToUpdateDelay -- <no description>
      useampimixer   -- Enable or disable AMPI mixer
      UseNTSCAudioRate -- Toggles use bad NTSC value 29.97
      UseThreadedScheduler -- Use the threded buffer scheduler or make the schedule calls right from the player->play() loop
      UseVC3Labels   -- Enable/Disable the use of VC3 labels when creating DNxHD MXF media
      ValidateConfig -- Validates the current deck configuration against the decks actually connected.
      verbosE        -- Sets the level of information that goes to the screen. Verbose level must be between 0 and 5. 0 means don't echo anything, 5 means echo it all. Standard level is 4.
      VTRE           -- Accesses VTR Emulation debug information.  Type 'vtre help' for more info.
      VTREPriority   -- Reports the current priority setting and whether setting the thread priority for VTRE was successful.
      WatchSequence  -- Toggle watch sequence mode, which watches the integrity of the sequence in the timeline and alerts if it becomes corrupted.
      WaveformCacheStats -- displays memory usage to the console
      WaveformCommands -- Displays commands that affect the Advanced Waveform Engine
      WGPurgeAllOnDelete -- <no description>
      WriteFrameIndex -- <no description>
      WriteSizeMegs  -- Set Megs to Write
      XDebug         -- <no description>
      xfermgr        -- TransferStatusWindow debug
     
    Вверх Снизу